LAN CONTROLLER

LAN Controller operates in two modes:
1.STAND ALONE MODE
                  The LAN controller unit is connected to the serial port of the computer via the serial cable provided and is powered up using the 9v adapter provided. The wireless client software is installed on the system. The user can now access the LAN Controller transmitter via the wireless client software. The user can select the desired zone and level and set the desired zone and level and set the lights to his comfort.
2.NETWORK MODE : User can control the lights in LAN network

GSM/GPRS TRANSMITTER

The lighting system consists of mainly two components. The Transmitter and the receiver sections. The receiver section consists of RF receiver cartridges, which are connected to the dimmable ballast. These cartridges have address ranging from 1 to 250.This fives them an unique identity and enables them to be zoned i.e. group pf lights can be configured to have the same address (zone). The Light levels range from 1 to 6 with level 1 being OFF and level 6 being FULL BRIGHT.

ACTIVE TAGS

 Active tags are clipped to individuals that track their presence within the work area and emit RF signals for pick up by the controllers automatically. These devices are helpful in tracking the person within the complex and also other assets. These also function as security devices for access within the facility.

FIRE & SMOKE DETECTOR

This multi sensor represents the next generation of fire detectors that gives an earlier warning of fire or smoke ,with the ability to discriminate against false alarms. Fuzzy logic software using multi - criteria sensing from the basis of this intelligent detector.

The detector consists of integrated high sensitivity smoke and thermal sensors. The system combines the dynamic results of rates of change, patterns, and absolute levels of smoke and heat to identify real fire criteria. Selectable software algorithms allows the response to be matched to each particular hazard. This combined with the i LUX makes the detector addressable.
.

MAGIC EYE

    AEL provides a range of Electronic Ballast products to automatically adjust the ballast light to the continuously "Changing" Day Light conditions, smoothly. This family of AEL is Ballasts is called "Magic Eye".

      The Light sensing "Eye" incorporated the ballast design does the "Magic" of Dimming control in an inverse way. The sensor mounted  external to the ballast, has to be oriented to "look" at the general daylight coming from the windows.

The ballast will be OFF or DIM at full daylight, and will go to full brightness, when the natural daylight is very low. Magic - eye ballast is factory calibrated for the best dynamic control range for the tube light, based on day light variations.

Energy Efficient Tube Light

Saving energy was never simpler than this.

 Asian E+® is a unique method to convert existing T12 and T8 installations into the next 0generation of T5 tube light technology.0

Asian E+® range of tube light system is an integrated assembly of the latest generation T5 troposphere lamps and state of the art electronics control gear assembled in a sleek aesthetically appealing plastic fitting. Asian E+® is ideal for retrofitting in existing installation without any change in fittings or wiring. Asian E+ saves up to 50% electricity vis-à-vis 40W (T12) installations and up to 30% vis-à-vis 36W (T8) installations